|
Input stage — Extremely low noise and low distortion
Maximum input signal — 8.5 VRMS @ unity gain
setting/.85 VRMS @ +20dB gain
Slew Rate — 22V/us
Input impedance — 2Meg ohms
Thd — <.003% @ 1Vo
Noise — All controls set “flat”/118dBV, referred
to input with gain set at +20dB
All controls set “flat”/106dBV, referred to input
with gain set at unity
|
“Worst Case” noise — 94dBV, all EQ set to
full boost, all Q controls set to full narrow, frequency controls
set to highest frequency.
3 Band EQ — each band has adjustable Q (bandwidth) from
.58 to 9.4 with 15 dB of boost and cut available
Low Frequency Band — Frequency adjustable from 39 Hz
to 408 Hz
Midrange Frequency Band — Frequency adjustable from
212 Hz to 2.35 KHz
High Frequency Band — Frequency adjustable from 1.8
KHz to 20 KHz
|
Notch Filters — Q (bandwidth) fixed at 9.0 with 15 dB
of cut available
Notch Filter #1: Frequency adjustable from 40 Hz-400
Notch Filter #2: Frequency adjustable from 80 Hz-800
Misc. Features
Input Jack — 1/4” Stereo, input on tip / output
on ring, allows interface with DTAR Solstice (Acoustic Mixer)
using a single, stereo cable.
Output Jack — 1/4” Mono
Power Supply — Internal +/- 15V derived from 15VAC external,
wall mounted power transformer.
|
