|
Instrument
|
Arch-Top Guitar
|
|
| Pickup |
TWIN SoundSpot Classic |
| Position |
One pickup disc under
each end of the bridge, clamped between the bridge and top |
Applying
The
Pickup |
Remove the nameplate stickers from the pickup discs. The
discs won’t be glued to the top, but rather held under
the bridge by the pressure exerted by the strings. Make sure
the pickup discs are clamped under the farthest points of
the bridge’s ends. Note: Only the thinnest part of the
discs should be pushed under the bridge. You will probably
have to loosen the strings a little so that the bridge can
be raised enough to accommodate the discs. Once the discs
are in place, tape the cord to the guitar’s body so it
won’t rattle.
|
| Jack |
A 1/4" jack is attached to the
guitar at its lower bout near the strap button. Use the self-adhesive
dual-lock hook-and-loop strip. |
| Usage Tips |
All standard guitar amps
can be used with a guitar equipped with the TWIN SoundSpot Classic.
Also note that using the TWIN SoundSpot Classic on guitars with
magnetic pickups allows you to mix in an added dimension of
clarity and tone. Experiment combining the two signals, or placing
them in different channels of a stereo amp or recording setup. For P.A. and recording applications, a high-quality direct box such as as the D-TAR Solstice or Equinox is suggested. |
|
|
|
